HOW TO USE & CARE FOR ANY AIRLESS PUMP Do not unscrew the top of your packaging before reading these care & use instructions Thank you for helping care for our environment! All Skin O2 products are checked for 100% quality control before dispatch. Skin O2 Multi Vit and Radiance Mineral Primers both have airless pumps.
Dr Atia chose to use an airless pump to help our environment and to be better for skin conditions such as acne, rosacea or post-surgery skins.
Skin O2 specifically chose these airless pumps for extra stability and to help reduce bacterial cross-contamination.
Other serums & especially liquid foundations can be prone to hazardous bacterial contamination due to their composition and some containers can further expedite this problem- so with SkinO2 they give you extra TLC!
USE & CARE INSTRUCTIONS
Your brand new airless pump will need a few pumps initially just to draw the product up into the nozzle and then you need to invert and shake down before each use to ensure maximum product delivery per pump.
If After initial pump priming and inverting & shaking DOWN before each use, if you continue to experience any pump issues-please check the following: Unscrew the pump lid and look inside- even though there is product on the edges, your product may be used up and it is time for a new one. The airless serum packaging will not be able to suck the last remainders of your product - to use it all up you can just take off the top and tap it out on to the palm of your hand or scoop it out with a clean cotton tip just as would with any non- airless serum container.
If you unscrew the lid of these products before it was used up -you may have released the vacuum seal. So you will need to reset the vacuum by using a paper clip: Insert paper clip in the pin hole at the bottom of the bottle when the lid is off to push the vacuum seal back into place. If you have sufficient remaining product, ensure the pump lid is screwed on tightly again to maintain the vacuum seal. Invert & Shake product down towards the pump a couple of times to ensure product gathers in the middle ready to be pumped up.
